Cougar V6-153 2.5L DOHC VIN L SFI (2001)
5. Connect the two vacuum supply lines to the upper intake manifold.
6. NOTE: Use a new EGR valve gasket.
Install the accelerator bracket and EGR valve to the upper intake manifold.
1
Position the accelerator bracket and install the bolts.
2
Connect the accelerator and speed control cables to the throttle body.
3
Position the EGR valve and the bolts.
7. Install the water pump pulley cover.
1
Install the cover.
2
Install the bolts.
3
Attach the coolant hose to the clip.
8. Install the ACL.
9. NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its
adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
Connect battery ground cable.
