Cougar V6-153 2.5L DOHC VIN L SFI (2001)
3
Remove the cover.
3. Unclip the wire and cable from the bridge and remove the bridge.
4. Rotate the belt tensioner clockwise, towards the camshaft drive pulley, to release the drive belt tension and remove the belt.
5. Remove the water pump drive pulley.
1
Install special tool.
2
Install special tool then turn the center bolt.
3
Remove the pulley.
6. NOTE: In order to make sure correct sealing do not scratch the camshaft.
Using the special tools, remove the camshaft oil seal.
Installation