Cougar V6-153 2.5L DOHC VIN L SFI (2001)
Exhaust Pipe: Service and Repair
Exhaust Pipe
Flexible Pipe
Removal
1. Raise and support the vehicle.
2. Remove the flexible pipe.
1
Remove the six nuts (four shown).
2
Detach the flexible pipe from the hanger insulator.
Installation
CAUTION: The hanger insulators are constructed of a special material. Use only the correct specification insulators.
1. NOTE: Check the hanger insulators for damage or fatigue. Install new insulators if required. Install new gaskets.
Install the flexible pipe.
1
Install the flexible pipe in the hanger insulator.
-
Lubricate the hanger insulator with Myrpol Lubricant D7AZ-19553-AA or equivalent meeting Ford Specification ESE-M99B144-B.
2
Install the six nuts (four shown).