Cougar V6-153 2.5L DOHC VIN L SFI (2001)
16. Remove the right and left-hand radiator support brackets (left-hand shown).
17. Remove the subframe brace to fender retaining screws (one each side).
18. Remove the engine support bar retaining nuts.
19. Remove the front subframe retaining screws.
CAUTION: Use a general equipment (Hi- Lift Transmission Jack), to support the subframe.
20. Lower the subframe and remove the suction accumulator to evaporator line.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
-
Install new refrigerant line O-ring seals.
