Cougar V6-153 2.5L DOHC VIN L SFI (2001)
5. Remove the coolant expansion tank and place to one side.
-
Remove the screws.
-
Disconnect the electrical connector.
NOTE: Do not drain the coolant system or disconnect any hoses.
6. Disconnect the electrical connector and remove the pressure cut-off switch.
7. Remove the ignition coil.
8. Pull off the clips of the air conditioning lines.
9. Using the special tool, disconnect the line from the condenser at the evaporator.
NOTE: Seal the line and the evaporator with plugs.
10. Raise and support the vehicle.