Cougar V6-153 2.5L DOHC VIN L SFI (2001)
31. CAUTION: Where the steering gear unions are disconnected, the steering gear valve body ports should be plugged to prevent dirt ingress.
Disconnect the high-pressure tube union.
32. Remove the high-pressure tube.
Installation
1. If a new tube is to be installed, push the new tube into the new union.
2. Using the special tool, install a new union O-ring seal.
1. Push the new O-ring seal onto the special tool.
2. Locate the tool on the union and push on the new O-ring seal.
3. Connect the high-pressure tube union.
