Cougar V6-153 2.5L DOHC VIN L SFI (2001)
6. Install the fluid cooler lines retaining bracket.
7. Using the special tool, align the subframe.
1. Install the alignment pins in the subframe aligning holes.
2. Install the locking pins.
3. Tighten the alignment pin sleeves.
8. NOTE: Make sure the blue colored bolts are installed to the front.
Install the subframe retaining bolts.
9. Remove the special tool (subframe alignment pins).
10. Remove the subframe support. Vehicles with manual transaxle
11. Install the rear support insulator center bolt.
Vehicles with automatic transaxle
