mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Module Communication Network <--> [Information Bus]|Description and Operation|Page 3789 > < Module Communication Network <--> [Information Bus]|Description and Operation
Page 2
background image

The data link connector (DLC) serves as an interface between the modules and the diagnostic tester. This electrical connector is connected to all
modules capable of diagnosis through the diagnostic data buses (SCP or ISO 9141).

Air bag control module

The air bag control module is connected to the data link connector through the diagnostic data bus (ISO 9141) and controls the driver and passenger
air bags and the seat belt tensioner system.

Powertrain control module (PCM)

The Powertrain Control Module (PCM) governs all operations in connection with the engine. The PCM is linked to the data link connector (DLC)
through the diagnostic data bus (SCP). Data stored in the PCM can be read through the DLC using the New Generation Star (NGS) diagnostic tester.

Module Communication Network <--> [Information Bus]|Description and Operation|Page 3789 > < Module Communication Network <--> [Information Bus]|Description and Operation