mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Fuel Pressure Regulator|Service Precautions|Page 4516 > < Fuel Pressure Regulator|Service Precautions|Page 4514
Page 1
background image

Fuel Pressure Regulator: Service and Repair

REMOVAL

CAUTION:  Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable
vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.

1. Release the fuel pressure.
2. Remove the upper intake manifold.

3. Disconnect the vacuum line from the fuel pressure regulator.

4. Disconnect the Intake Manifold Runner Control (IMRC) operating rod.

5. Remove the fuel pressure regulator.

^

Discard the O-rings seals.

INSTALLATION

CAUTION:  Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable
vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.

Fuel Pressure Regulator|Service Precautions|Page 4516 > < Fuel Pressure Regulator|Service Precautions|Page 4514