mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Customer Interest for Air Bag Control Module: > < Diagram Information and Instructions|Page 1393
Page 1
background image

Air Bag Control Module: All Technical Service Bulletins
Airbags - Warning Lamp ON, DTC's U2017/U2018 Set

Article No.
01-3-5

02/19/01

^

ELECTRICAL - AIRBAG WARNING LAMP

^

ILLUMINATED - DIAGNOSTIC TROUBLE CODES

^

(DTC) U2017 AND/OR U2018 STORED IN

^

MEMORY - VEHICLES WITHOUT SIDE AIRBAGS

^

ELECTRICAL - LAMP - AIRBAG WARNING LAMP

^

ILLUMINATED - DIAGNOSTIC TROUBLE CODES

^

(DTC) U2017 AND/OR U2018 STORED IN

^

MEMORY-VEHICLES WITHOUT SIDE AIRBAGS

MERCURY:
1999-2001 COUGAR

ISSUE

Some vehicles not equipped with side airbags may exhibit a condition where the Airbag Warning Lamp is illuminated with Diagnostic Trouble Codes
(DTCS) U2017 and/or U2018. This may be caused by the Airbag Control Module defaulting to a vehicle configuration with side airbags. These codes
are unwarranted and will not affect proper restraint system function.

ACTION

Verify Airbag Warning Lamp illumination and DTCs U2017 and/or U2018. Replace Airbag Control Module using new module (YS8Z-14B321-BA)
with a default configuration of a vehicle without side airbags. Refer to the following Service Procedure for details.

SERVICE PROCEDURE

NOTE:

REFER TO THE APPROPRIATE MODEL YEAR COUGAR WORKSHOP MANUAL FOR AIRBAG CAUTIONS AND MODULE REMOVAL
AND INSTALLATION INSTRUCTIONS.

1.

Verify Airbag Warning Lamp illumination and DTCs U2017 and/or U2018.

2.

Verify vehicle is not equipped with side airbags.

3.

Replace the existing Airbag Control Module with the revised service part. Refer to the appropriate model year Cougar Workshop Manual, Section
501-20B for the removal and installation procedure.

Parts Information

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 104000, 206000

Customer Interest for Air Bag Control Module: > < Diagram Information and Instructions|Page 1393