Cougar V6-153 2.5L DOHC VIN L SFI (2001)
10. Detach the air bag sliding contact.
^
Release each of the three retaining tangs using a thin bladed screwdriver.
11. Remove the air bag sliding contact.
^
Feed the electrical connectors through the column aperture.
INSTALLATION
1. Centralize the sliding contact.
1. Rotate the inner rotor against the outer rotor fully COUNTERCLOCKWISE until it stops.
2. Rotate the inner rotor CLOCKWISE approximately 2.75 turns until the alignment markings are aligned and the locking tab locates into the
slot.
WARNING:
^
THE SLIDING CONTACT CENTRALIZING PROCEDURE MUST BE CARRIED OUT BEFORE INSTALLING THE SLIDING
CONTACT.
^
IF THERE IS ANY DOUBT WHEN CARRYING OUT THE CENTRALIZING PROCEDURE. REPEAT THE CENTRALIZING
PROCEDURE. FAILURE TO FOLLOW THIS WARNING MAY CAUSE COMPONENT FAILURE AND CAUSE PERSONAL
INJURY.
