mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Generator Testing|Page 5827 > < Generator Testing|Page 5825
Page 1
background image

Alternator: Service and Repair

Special Tools

SPECIAL TOOL(S)

REMOVAL

1. Disconnect the battery ground cable.
2. Remove the accessory drive belt.

3. Remove the tie-rod end nut.

4. Using the special tool, separate the tie-rod end from the wheel knuckle.

CAUTION:  Protect the ball joint seal to prevent damage.

5. Remove the wheelarch liner.

Generator Testing|Page 5827 > < Generator Testing|Page 5825