mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Steering Column > < Power Steering Pressure Switch|Page 6439
Page 1
background image

Power Steering Pressure Switch: Service and Repair

REMOVAL

1. Disconnect the Power Steering Pressure (PSP) switch electrical connector.

2. Remove the PSP switch.

NOTE:  Be prepared for some power steering fluid loss as the switch is removed. Place a small drain tray beneath the switch.

INSTALLATION

1. To install, reverse the removal procedure.
2. Bleed the power steering system.

Steering Column > < Power Steering Pressure Switch|Page 6439