Cougar V6-153 2.5L DOHC VIN L SFI (2001)
21. CAUTION: Make sure that the pressure check valve does not fall out of the valve body pressure port when the steering gear is being removed.
Remove the steering gear.
Installation
1. Using the special tool, Install new union O-ring seals.
1. Push the new O-ring seal onto the special tool.
2. Locate the tool over the union and ease the O-ring seal onto the union.
2. CAUTION: Make sure the pressure check valve is correctly located.
Install the steering gear.
3. Install the steering gear cover plate.
