mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Suspension Strut / Shock Absorber|Removal and Installation|Page 6570 > < Suspension Strut / Shock Absorber|Removal and Installation|Page 6568
Page 4
background image

15. CAUTION:  Protect the ball joint seal to prevent damage.

Detach the lower arm from the wheel knuckle.

16. CAUTION:  Secure the wheel knuckle to prevent damage to the halfshaft.

Detach the wheel knuckle.

17. WARNING:  Support the strut and spring assembly. Failure to follow these instructions may result in personal injury 

CAUTION:  Use an Allen key to prevent the piston rod from rotating and causing damage.

Detach the strut and spring assembly.

Installation 

1. Position the strut and spring assembly.

^

Loosely fit the nut.

Suspension Strut / Shock Absorber|Removal and Installation|Page 6570 > < Suspension Strut / Shock Absorber|Removal and Installation|Page 6568