Cougar V6-153 2.5L DOHC VIN L SFI (2001)
8. NOTE: If the lip of the servo piston is brittle install a new servo piston.
CHECK the servo piston lip.
9. Inspect the servo retainer spring for cracks, breaks or deformation.
Installation
1. WARNING: Servo return spring force is very high. Failure to follow these instructions may result in personal injury.
Assemble the special tool.
2. Install the special tool.
3. CAUTION: If the case is stamped with a WG, install a wide groove snap ring. Failure to follow this instruction may result in damage to the
servo.
CAUTION: Use only snap ring pliers to install the retaining ring. Failure to follow this instruction may result in damage to the case.
NOTE: If the servo cover will not seat deep enough in the bore to install the servo cover retaining ring, use a blunt punch or small hammer and
gently tap the cover around the outer edge until the servo cover retaining ring can be installed.
Tighten the special tool bolt.
^
Install the retaining ring.
