Cougar V6-153 2.5L DOHC VIN L SFI (2001)
12. Remove the solenoid body harness connector.
1. Depress the retaining tabs.
2. Push the solenoid valve body electrical connector down through the transaxle case.
13. Make sure the manual valve control lever does not tall out while removing from the vehicle.
Installation
1. Install the manual valve.
3. NOTE: Inspect solenoid valve body harness connector O-ring seal and install new as necessary before installing solenoid valve body harness
connector in transaxle case.
Push the solenoid valve body harness connector up through the transaxle case.
