Cougar V6-153 2.5L DOHC VIN L SFI (2001)
2. CAUTION: To avoid to damage halfshaft joints and boots, do not bend the inner halfshaft joint by more than 18 degrees, the outer one by not
more than 45 degrees.
Using the special tool, install the halfshaft to the hub.
3. Install the hub nut.
4. CAUTION: Do not damage boot and ABS sensor ring
Connect the lower right-hand suspension arm ball joint.
^
Attach the ABS wiring harness bracket to the suspension strut.
5. Install the fender splash shields (right-hand side shown).
6. Install the right-hand front wheel.
