mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Shift Cable, M/T|Specifications|Page 5388 > < Shift Cable, M/T|Specifications|Page 5386
Page 2
background image

6. Remove the selector cable.

^

Remove the selector cable from the bracket by twisting the bracket counterclockwise, and pull it downward out of the engine compartment.

7. Remove the floor console. 

8. Disconnect the shift cable and the selector cable from the gearshift lever.

^

Remove the cables by twisting the bracket counterclockwise.

9. Remove the screw from the air duct and push the air duct upward.

Shift Cable, M/T|Specifications|Page 5388 > < Shift Cable, M/T|Specifications|Page 5386