Cougar V6-153 2.5L DOHC VIN L SFI (2001)
Windshield: Service and Repair
General Equipment
^
Hot air gun
^
Pneumatic knife with offset blade
^
Interior auto glass cut-out knife kit
REMOVAL
1. Disconnect the battery ground cable.
2. Heat the Polyurethane (PU) adhesive if necessary.
NOTE: Should the ambient temperature fall below 10°C, heat the cartridges for approximately 15 minutes by placing them on a warm radiator,
or by using a hot air gun set at approximately 25°C.
3. Remove the cowl panel weatherstrip.
4. Remove the windshield wipers.
1. Lift the wiper arm covers.
2. Remove the wiper nuts.
3. Remove the washers.
4. Remove the wiper arms.
