Cougar/XR7 L4-140 2.3L SOHC (1982)
Figure 4
Figure 5
2.
Remove the diverter valve and the actuator wire feed from servo assembly using a small screw driver to unsnap the actuator wire from the servo
retaining pin. (Figures 4 or 5).
3.
Connect the new diverter valve actuator to the servo retaining pin. (Figures 4 or 5).
4.
Secure the diverter valve to the servo using the new push-nuts provided (Figures 4 or 5).
5.
Reinstall the servo in the vehicle using the new push-nut on door shaft as described in the respective vehicle shop manual. Ensure that the
temperature door crank arm is installed through brass eyelet on servo for Crown Victoria/Grand Marquis, Lincoln Town Car and Continental Mark
VI vehicles (Figure 4).
6.
Check the system for proper operation. Refer to the respective shop manual under Description and Operation.
Part Requirements 1984-85 Ford Crown Victoria, Mercury Grand Marquis, Uncoin Town Car
PART NUMBER
PART NAME
CLASS
E5VY-19E669-A
Diverter Valve
Auto-Blower System
B
1982-83 Ford Crown Victoria, Mercury Grand Marquis, Lincoln Town Car, Continental Mark VI