mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Lock Cylinder Switch > < Keyless Entry Module|Locations|Page 9586
Page 1
background image

Keyless Entry Transmitter Battery: Service and Repair

Transmitter Battery Replacement

REMOVAL 

1. Snap apart the transmitter case by twisting a coin between the edges of the front and rear halves.

CAUTION:  Do not take the front half of the transmitter apart.

2. Remove the discharged batteries.

INSTALLATION 

1. Install the new batteries.

NOTE:  Batteries must be installed with the positive side toward the bottom of the transmitter case.

2. Snap the two halves of the transmitter case back together.

Lock Cylinder Switch > < Keyless Entry Module|Locations|Page 9586