Cougar/XR7 V8-4.6L VIN W (1997)
5. Separate pump from valve body. Note position of O-ring tab.
6. Remove reservoir and ABS fluid level switch from pump using a screwdriver.
ASSEMBLY
1. Lubricate pump seals with brake fluid and push on brake reservoir.
2. Place O-ring plate on valve body noting position of tab. Place pump on valve body and start three Torx bolts. Tighten to 21-29 Nm (16-21 ft. lbs.)
.
3. Install pump and valve body on ABS unit mounting bracket. Tighten three Torx bolts to 7-9 Nm (62-79 inch lbs.).
4. Start brake lines into valve body. Tighten to 14-24 Nm (11-17 ft. lbs.).
5. Install Hydraulic Assembly.
6. Bleed brake system. See: Service and Repair
