Cougar/XR7 V8-4.6L VIN W (1997)
Traction Control Switch: Service and Repair
REMOVAL
1. Turn ignition switch to "OFF".
2. Gently insert a small, flat screwdriver into one of either access slots located on the vertical edges of the indicator lamp module bezel. Place a cloth
pad between the screwdriver and the instrument panel to protect the finish.
3. Gently pivot the screwdriver away from the indicator lamp module depressing the mounting tab toward the indicator lamp module.
4. Apply a light outward force to free the end of the indicator lamp module from the instrument panel. Free other end of indicator lamp module with
same procedure. Pull indicator lamp module from instrument panel and unplug connector.
5. Push in metal spring tabs, remove traction control switch from indicator lamp module.
INSTALLATION
1. Install traction control switch onto indictor lamp module.
2. Plug instrument panel connector into indicator lamp module connector.
3. Snap indicator lamp module into instrument panel opening.
