Cougar/XR7 V8-4.6L VIN W (1997)
10. Install RH timing chain on camshaft sprocket. Make sure copper link of timing chain lines up with timing mark of camshaft sprocket.
11. Install RH timing chain on crankshaft sprocket. Make sure copper link of timing chain lines up with timing mark of crankshaft sprocket.
12. Install RH and LH timing chain tensioner and secure with two bolts on each. Tighten bolts to 20-30 Nm (15-22 ft. lbs.).
13. Install Crankshaft Holding Tool T93P-6303-A over crankshaft and engine front cover alignment dowel, to position crankshaft.
14. Lubricate timing chain tensioner arm contact surfaces with clean engine oil and install RH and LH timing chain tensioner arms on their dowels.
