Cougar/XR7 V8-4.6L VIN W (1997)
5. Install crankshaft pulley bolt and crankshaft pulley retaining washer. Tighten in four steps:
a. Tighten to 90 Nm (67 ft. lbs.).
b. Loosen bolt one full turn.
c. Tighten bolt to 50 Nm (37 ft. lbs.).
d. Tighten an additional 90 degrees.
NOTE: Make sure key on crankshaft aligns with keyway of crankshaft pulley.
6. Lower vehicle.
7. Install drive belt.
8. Connect battery ground cable.
9. Start engine and check for leaks.
