mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Throttle Position Sensor > < Inertia Fuel Shutoff Switch|Locations|Page 5179
Page 1
background image

Inertia Fuel Shutoff Switch: Service and Repair

REMOVAL

1. Open luggage compartment door.
2. Pull back luggage compartment trim and remove two screws retaining inertia fuel shutoff switch to vehicle.
3. Disconnect wiring harness connector from inertia fuel shutoff switch and remove switch.

INSTALLATION

1. Follow removal procedure in reverse order.
2. Tighten retaining screws to 1.6-2.2 Nm (15-19 lb in). 

Throttle Position Sensor > < Inertia Fuel Shutoff Switch|Locations|Page 5179