Cougar/XR7 V8-4.6L VIN W (1997)
4. Install two vertically driven bolts on both sides of bottom of passenger side air bag module. Tighten bolts to 7-11 Nm (62-97 lb in).
5. Install both pieces of air duct and center bolt. Install three screws that attach air duct.
6. Pull LH side of glove compartment in and return glove compartment to correct position.
7. Install damping rod on RH side of glove compartment.
8. Close glove compartment.
9. Reconnect battery ground cable.
10. Prove out air bag system.
11. Reprogram USER 1 and USER 2 preset radio frequencies and set clock.
