Cougar/XR7 V8-4.6L VIN W (1997)
Power Steering Fluid Cooler: Service and Repair
REMOVAL
1. Reposition hose clamps at power steering fluid cooler and disconnect power steering return hose.
2. Remove two retaining screws that secure power steering fluid cooler to the lower front bumper rail.
3. Remove power steering fluid cooler.
INSTALLATION
1. Position power steering fluid cooler to lower front bumper rail and secure with two retaining screws. Tighten to 9-12 Nm (80-106 inch lbs.).
2. Connect power steering return hose to power steering fluid cooler and position hose clamps.
3. Fill system with MERCON Multi-Purpose (ATF) Transmission Fluid or equivalent.
