mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Mechanical Specifications|Page 8072 > < Mechanical Specifications
Page 1
background image

Power Steering Pump: Pressure, Vacuum and Temperature Specifications

Flow Rate [1]

Minimum Flow [2] .................................................................................................................................................................  5.3 L/min (1.4 gallons/min)
Maximum Flow [3] ................................................................................................................................................................ 10.2 L/min (2.7 gallons/min)

Relief Pressure [1]

Minimum ............................................................................................................................................................................................  8275 kPa (1200 psi)
Maximum ...........................................................................................................................................................................................  9520 kPa (1380 psi)

[1]

Fluid should be at 78°C (172°F) and 5100 kPa (740 psi) at 675 rpm. Vehicle at Zero speed (not moving).

[2]

Flow depends on pump model, engine rpm and pulley drive ratio. Engine idle rpm must be set to specification when checking pump minimum flow
capacity. 

[3]

Maximum Free Flow @ 1500 rpm.

Mechanical Specifications|Page 8072 > < Mechanical Specifications