Cougar/XR7 V8-4.6L VIN W (1997)
Tie Rod End: Component Tests and General Diagnostics
NOTE: This check may be done with the power rack and pinion steering gear on or off the vehicle:
1. Disconnect tie rod end from the front wheel spindle (RH) using Tie Rod End Remover TOOL-3290-D or equivalent.
2. Hook Spring Scale T74P-3504-Y over tie rod end and measure force required to move front wheel spindle tie rod.
3. If force required to move front wheel spindle tie rod is not between 8.9-45 N (2-10 lbs.), replace front wheel spindle tie rod.
