mercury Workshop Repair Guides

Mercury Cougar/XR7 V8-46L Workshop Service and Repair Manuals

ABOUT US
Band Apply Servo, A/T|Removal|Page 5692 > < Band Apply Servo, A/T|Removal|Page 5690

Removal of Band Apply Servo in Cougar/XR7 V8-46L VIN W (1997) Transmission

Page 3
background image

5. Remove piston assembly. Remove overdrive servo piston return spring.
6. Use Servo Piston Remover/Replacer T92P-70023-A to contact the reverse band servo cover and compress return spring and remove accumulator

piston retaining ring.

7. Remove reverse band servo cover, reverse band servo piston and rod and reverse band servo spring.

NOTE:  The length of the rod attached to the piston is graded for three different lengths. Therefore, they should not be installed in any
transmission other than the transmission from which they were removed.

Band Apply Servo, A/T|Removal|Page 5692 > < Band Apply Servo, A/T|Removal|Page 5690