Cougar/XR7 V8-4.6L VIN W (1997)
8. Install pan magnet to transmission pan.
9. Clean, inspect and install pan-to-case gasket and transmission pan. Tighten all bolts to 12-15 Nm (9-11 ft. lbs.).
NOTE: Transmission pan-to-case gasket is reuseable if not damaged.
10. Lower vehicle.
11. Pour 4.7 liters (5 quarts) of Motorcraft MERCON or MERCON V Automatic Transmission Fluid or equivalent meeting FORD approved fluid
into fluid filler tube.
12. Reconnect battery ground cable.
13. Start the engine and add specified fluid as required to achieve the proper fluid level.
14. Check the transmission for leaks.
