Cougar/XR7 V8-4.6L VIN W (1997)
2. Apply continuous bead of Silicone Rubber D6AZ-19562-AA or equivalent meeting Ford specifications ESB-M4G92-A or ESE-M4G 195-A to
groove in axle housing cover.
CAUTION: Make sure machined surfaces on both axle housing cover and rear axle housing are clean before installing new silicone rubber.
Inside of axle must be covered when cleaning machined surface to prevent axle contamination.
NOTE: Axle housing cover assembly must be installed within 15 minutes of application of silicone rubber or new silicone rubber must be
applied.
3. Position axle housing cover and install retaining bolts (place service identification tag in the 12 o'clock position). Tighten to 27-37 Nm (20-27 ft.
lbs.).
CAUTION: Tighten axle housing cover bolts in a crosswise pattern to prevent distortion of axle housing cover.
NOTE: Make sure rear axle housing vent and rear axle hose are clear from restrictions.
4. Install Differential Axle Housing. See:
