Cougar/XR7 V8-4.6L VIN W (1997)
Deflector Installation
Deflector Gap
3. Install lubricant deflector using 1/8-inch Allen wrench. A gap of 5.08-6.35 mm (0.200-0.250 inch) must exist between deflector and back face of
axle housing cover.
CAUTION: If shield gap is not 5.08-6.35 mm (0.200-0.250 inch) it will cause vent leak and axle overheating.
4. Inspect rear axle hose for cracks and restrictions. Replace as required. Install rear axle hose.
