Cougar/XR7 V8-4.6L VIN W (1997)
3. With pinion nut still engaged by a few threads install 2-Jaw Puller D80L-1002-L or equivalent and pull rear axle universal joint flange loose on
splines.
4. Remove puller, nut and rear axle universal joint flange.
5. With a soft-faced hammer, drive the drive pinion out of the differential pinion bearing and remove through rear of rear axle housing.
6. Remove rear axle drive pinion seal. See: Seals and Gaskets/Service and Repair/Pinion Seal
PINION BEARING & CUP REMOVAL
1. Using a press and Pinion Bearing Cone Remover T71P-4621-B. remove differential pinion bearing assembly from the rear axle differential pinion.
