Cougar/XR7 V8-4.6L VIN W (1997)
Pinion Gear: Adjustments
Backlash
DESCRIPTION
Follow this procedure when original differential bearing shims are not available or when rear axle housing, differential case or differential bearing
replacement is required.
PROCEDURE
1. With pinion depth set and pinion installed, place the differential case/gear subassembly with differential bearings and differential bearing cups in
rear axle housing.
2. Install a 6.75 mm (0.265-inch) differential bearing shim on the LH side.
3. Install LH bearing cap finger-tight.
