Cougar/XR7 V8-4.6L VIN W (1997)
4. Install differential bearing shims progressively on the RH side until the largest differential bearing shim selected can be assembled with a slight
drag feel.
5. Install RH side bearing cap and differential bearing cap bolts. Tighten to 95-115 Nm (70-85 ft. lbs.).
6. Rotate the assembly to make sure differential assembly rotates freely.
7. Check gear and pinion backlash. If backlash is within specification, go to Step 14. If backlash is not within specification, go to Step 10. If zero
backlash is measured, proceed with Step 8.