Cougar/XR7 V8-4.6L VIN W (1997)
Wiper Arm: Adjustments
The windshield wiper pivot arm and windshield wiper blade assemblies are positioned using a key and a keyway. If adjustment is required remove
windshield wiper pivot arm and windshield wiper blade assembly.
1. Using a small flat-end screwdriver, remove plastic key from windshield wiper pivot arm.
2. Locate windshield wiper blade to installation position.
NOTE: Prior to installation of windshield wiper pivot arms and windshield wiper blades, operate multi-function switch to cycle windshield wiper
mounting arm and pivot shaft to the park position.
3. Install windshield wiper pivot arm on windshield wiper mounting arm and pivot shaft and apply downward pressure on windshield wiper pivot
arm. Allow latch to slide under windshield wiper mounting arm and pivot shaft and slide latch using finger pressure only.
NOTE: Raise windshield wiper pivot arm slightly to allow latch to slide under windshield wiper mounting arm and pivot shaft.
4. Lower windshield wiper pivot arm to windshield wiper arm stops.
