Grand Marquis V8-281 4.6L SOHC (1992)
Power Mirror Switch: Customer Interest
Power Mirror - Blows Fuse
Article No.
92-14-2
07/01/92
^
MIRROR - POWER - SWITCH BLOWS FUSE
^
SWITCH - POWER WINDOW - BLOWS FUSE
FORD:
1992 CROWN VICTORIA, TEMPO
LINCOLN-MERCURY:
1992 GRAND MARQUIS, TOPAZ
This TSB article is being republished in its entirety to update the technical information and parts involved when replacing the Power Mirror Control
Switch.
ISSUE:
Adjusting the power mirror may cause the No. 4 circuit fuse (15 amp) to blow on some vehicles. This occurs because of an internal electrical short within
the switch.
ACTION:
Inspect the power control switch. If the switch checks "good" and the switch part number is listed in the chart do not replace the switch. When the switch
is defective or is NOT listed in the chart, replace the switch. Refer to the Service Manual, Section 01-09, for service details.
POWER MIRROR CONTROL SWITCH CHART
SWITCH PART
NUMBER
VEHICLE LINE
F23Z-17B676-A
Tempo/Topaz
F2AZ-17B676-A
Crown Victoria/Grand
Marquis
NOTE:
AFTER THE NEW SWITCH IS INSTALLED, WRAP FOAM TAPE (E4AZ-19627-B, OR EQUIVALENT) AROUND THE CONNECTOR.
PART NUMBER
PART NAME
CLASS
F23Z-17B676-A
Power Mirror Control Switch
B
(Tempo/Topaz)
F2AZ-17B676-A
Power Mirror Control Switch
B
(Crown Victoria/Grand Marquis)
E4AZ-19627-B
Foam Tape
BM
OTHER APPLICABLE ARTICLES:
NONE
SUPERSEDES:
91-17-1
WARRANTY STATUS:
Eligible Under Bumper to Bumper
OPERATION
DESCRIPTION
TIME
921402A
Replace Control Assembly -
0.5 Hr.
Crown Victoria, Grand
Marquis
921402A
Replace Control Assembly -
0.4 Hr.
Tempo, Topaz
DEALER CODING
BASIC PART NO.
CONDITION CODE
17B676
X1
OASIS CODES:
