Grand Marquis V8-281 4.6L SOHC (1992)
5.
Referring to Fig. 25, place gauge on edge over end of tubing and push tubing through jaws until end of tubing contacts recessed notch of gauge
matching size of tubing.
6.
Squeeze handles of flaring tool and lock tubing in place.
7.
Place proper size plug of gauge down in end of tubing. Swing compression disc over gauge and center tapered flaring screw in recess in disc.
8.
Lubricate taper of flaring or screw and screw in until plug gauge has seated in jaws of flaring tool. This action has started to invert the extended
end of tubing.
9.
Remove gauge and apply lubricant to tapered end of flaring screw and continue to screw down until tool is firmly seated in tubing.
10.
Remove tubing from flaring tool and inspect the seat. If seat is cracked, cut off cracked end and repeat flaring operation.
