mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Customer Interest for Fuel Gauge: > < Electronic Fuel Gage - Erratic Operation|Page 9063
Page 3
background image

10.

Run the wire along the existing rear lighting harness along the left side of the trunk to the existing ground (G400) located immediately below the
trunk latch striker at the rear-center of the trunk (refer to Figure 3).

11.

Install an eyelet on the end of the new ground wire and connect to ground as shown in Figure 3.

12.

Replace the wiring harness, install carpet and spare tire to their original positions.

13.

Verify proper operation of fuel system.

OTHER APPLICABLE ARTICLES:
NONE

WARRANTY STATUS:
Eligible Under Bumper To Bumper Warranty Coverage

OPERATION  DESCRIPTION

TIME

922105A

Relocate Fuel Sender

0.8 Hr.

Ground

DEALER CODING
BASIC PART NO. CONDITION CODE
14401

X1

OASIS CODES:
204000, 204100

Customer Interest for Fuel Gauge: > < Electronic Fuel Gage - Erratic Operation|Page 9063