Grand Marquis V8-281 4.6L SOHC (1992)
Seat Belt: Adjustments
Child Seat Locking Clip
The locking clip must be used to secure a child seat when the vehicle has a shoulder and lap belt with a sliding tongue. Every seat belt that requires a
locking clip is identified on the belt, with the label as shown in the illustration. The locking clip is installed on the sample piece of webbing to show
proper installation.
If the locking clip is not used, injuries could result from the child seat tipping over during normal vehicle braking or cornering.
Use these procedure to install the locking clip:
1. Thread the belt webbing through the child seat according to the child seat manufacturers instructions.
2. Buckle safety belt. Pull on shoulder portion of the belt to make the lap portion fit snugly. Keeping lap belt snug, hold lap and shoulder belt
portions of webbing together next to slip tongue and unbuckle safety belt.
3. Slide either corner of locking clip slot that is closest to the tongue over both layers of belt webbing, as shown.
