Grand Marquis V8-281 4.6L SOHC (1992)
Seat Belt: Adjustments
Shoulder Portion
You can adjust the shoulder belt height to one of five positions. To adjust, pinch the release button and slide it up or down until the belt rests on your
shoulder near your neck. Release the button and make sure the adjuster is firmly in one of the five positions.
WARNING: If the shoulder belt is off your shoulder or on your upper arm, there is a greater risk of severe injury in an accident.
The shoulder restraint portion of the safety belt adjusts automatically to a snug position.
WARNING: Do not introduce slack into the safety belt system because the belt locks upon impact where it is positioned. Use the shoulder
safety belt on the outside shoulder only. Never wear the shoulder belt under the arm. Never swing it around the neck over the inside shoulder.
Never use a single belt for more than one person.
WARNING: Ensure the lap portion of the belt is fitted snugly and as low as possible around the hips, not on the waist. Failure to follow these
precautions could increase the chance and/or severity of injury in an accident.
After unbuckling the belt it is recommended that care is taken during retraction to prevent it from striking other passengers, hitting trim panels, or painted
door surfaces.
