Grand Marquis V8-281 4.6L SOHC (1992)
Hazard Warning Switch: Service and Repair
1.
On models equipped with airbag, disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM
DISARMING.
2.
Tilt column to lowest position and remove tilt lever, if equipped.
3.
Remove ignition lock cylinder.
4.
Remove shroud screws, then remove upper and lower shrouds.
5.
Remove two screws attaching multi-function switch to steering column casting. Disengage switch from casting.
6.
Disconnect two electrical connectors.
7.
Reverse procedure to install, noting the following:
a. Torque retaining screws to 18-26 inch lbs.
b. Activate airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
