Grand Marquis V8-281 4.6L SOHC (1992)
Neutral Safety Switch: Service and Repair
1.
Disconnect battery ground cable.
2.
Remove air cleaner assembly.
3.
Place transmission selector lever in manual low position, then disconnect neutral safety switch electrical connector from switch. Lift connector
straight off without any side-to-side motion.
4.
Remove switch and O-ring using a 24 inch extension, universal adapter and socket No. T74P-77247-A. Use of any tools other than those
specified may result in damage to vehicle.
5.
Reverse procedure to install. Torque switch to 7-10 ft. lbs.
