Grand Marquis V8-281 4.6L SOHC (1992)
Wheel Bearing: Service and Repair
Fig. 3 Hub & Wheel Bearing Assembly
REPLACE
1.
Raise and support front of vehicle, then remove wheel and tire assembly.
2.
Remove grease cap from hub.
3.
Remove disc brake caliper with brake hose attached. Suspend caliper from suspension with wire. Do not allow caliper to hang from brake hose.
4.
Remove brake rotor.
5.
Remove hub nut, then remove hub and bearing assembly, Fig. 3. If difficulty is encountered in hub removal, use hub removal tool No.
T81P-1104-C or equivalent.
6.
Reverse procedure to install. Use a new hub nut and tighten to specifications.
