mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

MAP Sensor - Loping/Rolling Engine Idle|Page 1943 > < MAP Sensor - Loping/Rolling Engine Idle|Page 1941
Page 1
background image

Idle Speed: Adjustments

Fig. 2 Curb idle speed adjust. 5.0L Engine W/CFI

Fig. 3 Curb idle speed adjust. V8-302 Engine W/EFI

V8-302 W/EFI

    On 1986 - 88 models, curb idle speed is not adjustable. Curb idle is controlled by the EEC-IV and the idle speed control unit. Perform the
following procedure to set an initial adjustment.

1.

Place transmission into Neutral or Park and apply parking brake.

2.

Start and allow engine to reach normal operating temperature.

3.

Connect a suitable tachometer onto engine as per manufacturer's instructions.

MAP Sensor - Loping/Rolling Engine Idle|Page 1943 > < MAP Sensor - Loping/Rolling Engine Idle|Page 1941