Grand Marquis V8-302 5.0L VIN F TBI (1984)
FIGURE 8
2.
Locate the two drill dimples in the load floor above the rear floor pan and drill two 1/2" diameter holes in the load floor as shown in Figure 8.
3.
Remove the two plug buttons from the restraint anchors from the top of the vehicle with an awl.
4.
Secure the child restraints to the floor pan anchors and slit the carpet as shown in Shop Manual page 41-52-4, Figure 6. Torque bolts to the
restraint manufacturer's specifications.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"