Grand Marquis V8-4.6L Flex Fuel (2010)
Rear Door Window Regulator: Service and Repair
Window Regulator and Motor - Rear Door
Window Regulator and Motor - Rear Door
Removal and Installation
1. Remove the rear door window glass. For additional information, refer to Window Glass - Rear Door See: Rear Door Window Glass/Service and
Repair/Window Glass - Rear Door.
2. Remove the 2 rivets and the pull handle retainer bracket.
3. Disconnect the rear door window regulator motor electrical connector.
4. Remove the 2 rear door window regulator rivets.
5. Remove the 2 rear door window regulator nuts.
-
To install, tighten to 6 Nm (53 lb-in).
6. Remove the 3 rear door window regulator motor bolts and the rear door window regulator.
-
To install, tighten to 6 Nm (53 lb-in).
7. To install, reverse the removal procedure.
-
Use the Heavy Duty Riveter to install the rivets.
